Specifications

Chapter 6: Programming
Programming IP Devices
Page 6-74 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
To add IP endpoints:
1. Select Inter-Tel IP Endpoint or Mitel IP Endpoint from the Batch Change Type dialog
box. The Batch Create IP Endpoint dialog box appears.
2. Select a Starting Extension from the list of available extensions.
3. Enter the Number of Extensions using the stepper arrows or by selecting and typing a
value. Clicking the down stepper arrow removes extensions from the list. Clicking the up
stepper arrow adds extensions to the list.
4. Click any endpoint with a red “X” and type a valid MAC address. If desired, click Browse
and import the MAC addresses from a batch file. This batch file can be a simple text file
consisting of a list of MAC addresses. If the program needs 20 only address from the list,
it takes the first 20.
5. After you have typed the MAC addresses for all the IP endpoints you added, click OK.
6. Do one of the following:
• Add more IP endpoints.
• Or, click OK.
7. When finished with setting up IP devices, click Next on the IP Device Setup page. The
Expansion Module Installation page appears. See page 6-80.