Specifications

Chapter 6: Programming
Software License Operations – Upload Software License
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-65
Software License Operations – Upload Software License
You must upload a software license to the Mitel 5000 system. If you do not upload a software
license, the system considers the license invalid and issues Alarm 125. For a complete list of
alarm messages, refer to the Message Print Diagnostics Manual, part number 550.8018.
To upload a software license:
1. From the DB Studio menu bar, select Operations – Software License Operations –
Upload Software License.
2. Enter the path and name of the license file (.isl) or click Browse to search for the file.
3. Click Start. The system compares the new software license to the existing license, if
applicable.
4. Click Finish at the Compare Software License screen. If you click Cancel, the license is
not uploaded.
If you upload a software license that does not support your current programming, you will be
warned accordingly.
IMPORTANT
With regard to the USB security key and secure socket layer (SSL), the
serial number is stored on the USB security key. The license must match the
serial number on this key or the upload will fail.
If for any reason you need to replace the USB security key, make sure you
upload the latest license file before replacing the key.
Attempting to upload a license file after changing the USB security key
results in an error and the system will not function. If the USB security key is
not installed when the system reboots, the software license will need to be
uploaded.
NOTE
If you click Start before selecting a license (.isl), a message displays,
informing you that you have not identified a file name.