Specifications

Chapter 6: Programming
Transferring Licenses
Page 6-58 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
Transferring Licenses
If problems occur with the security key, you may have to transfer a license. See Table 6-17,
“Invalid License Upload Errors,” on page 6-60 for a list of error messages.
For information on transferring licenses, refer to the AMC Help or the Mitel Web site
(http://
edocs.mitel.com).
Changing the License
If necessary, you can upload a new license that provides a different set of features. If the new
license, however, supports new capacities, you must make sure that you have the appropriate
hardware installed.
To change a license, obtain a new license, as described on page 6-56, then upload the license
as described on page 6-60. The system compares the new license to the existing license and
then displays a screen similar to the one shown below.
Figure 6-7. Change Software License
In this screen, the areas of the license that are changing are selected. The status line indicates
whether the system requires a reset once the license is uploaded.
After you have verified you want to upload the new license, click Finish. The new software
license is loaded, and the old software license is stored on the system. The system may require
a reset.