Specifications

Chapter 6: Programming
Transfer Ground Start Trunks to T1 Module
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-53
Do the following:
1. Expand the IP Devices folder in
the Mitel 5000 view, and locate the
IP device you want to replace with
an unused IP device from the
Inter-Tel Axxess view.
2. Right-click the device, in the Mitel
5000 view, and select Delete.
3. Drag the unused IP device, from
the Inter-Tel Axxess view to the IP
Devices folder in the Mitel 5000
view. See page 6-38 for drag and
drop operations for IP devices.
Transfer Ground Start Trunks to T1 Module
Do the following:
1. Locate an empty bay on the Mitel 5000 side of the data form.
• Right-click the bay displaying Uninstalled, and select T1 Module. An example is
shown below.
• Click the + sign next to the module to expand it.
2. On the Inter-Tel Axxess side of the data form, locate and expand the card containing the
Ground Start trunks.
3. Drag and drop the Ground Start trunks to the expanded T1 Module locations. An
example is shown below.
Indicates IP
Device limit