Specifications

Chapter 6: Programming
Install a Module
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-51
Install a Module
Do the following:
1. Locate an empty bay displaying “Uninstalled” in the Mitel 5000 view.
2. Right-click and select the module type you want install, as shown in the example above.
The selections are:
• Basic Rate Module - S
• E1/PRI Module
• Loop Start Module - 2
• Loop Start Module - 4
• Single Line Module - 4
• T1 Module
• T1/PRI Module
NOTE
Effective with v2.1, production of the LSM-2 module was
discontinued, but existing modules are supported in DB Programming.