Specifications

Chapter 6: Programming
Converting a Database from Inter-Tel Axxess to Mitel 5000
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-47
6. Analyze the Data Form and do any of the following:
• Resubmit the conversion and remove any changes. See page 6-49.
• Perform drag and drop operations. See page 6-49.
• Remove a device from a module. See page 6-50.
• Install a module. See page 6-51.
• Uninstall a module. See page 6-52.
• Replace used IP devices with unused IP devices. See page 6-52. In the Mitel 5000
view, the IP device system limit is based on the type of Mitel 5000 platform chosen
for the destination in step 4 on page 6-46: 75 for a CS-5200, 175 for a CS-5400
and 250 for a CS-5600. The display updates each time an IP device is added to or
removed from the folder.
• Transfer Ground Start trunks to a T1 Module. See page 6-53.
• Change module capacity. See page 6-54.
• Change IP endpoint/softphone type. See page 6-55.
• Click Cancel to close the form and return to the Database Conversion utility. Click
Yes when prompted.
Right-click menus are not available from the Inter-Tel Axxess view. Right-click operations
are only permitted from the Mitel 5000 view.
Drag and drop
Items in the
Unsupported
Cards/Devices
Items in the
Unused IP
Devices folder
exceed the
folder cannot
destination
The Miscellaneous Devices folder holds
devices that may have existed in the
Inter-Tel Axxess database. These will
be automatically carried over into the
Mitel 5000 platform. These could
include a Page Port and Modem from
the Inter-Tel Axxess CPC card. If these
devices do not exist in the Inter-Tel
Axxess database, they will be created
automatically in the Mitel 5000
database. This folder is for information
only - these devices cannot be moved
or deleted.
Right-click to
select menu
options
Status appears
here, as
applicable
There are no
right-click
menu options
on the Axxess
side of the
data form
be moved to
the Mitel
5000 system
system
capacity