Specifications

Chapter 6: Programming
Tests and Error Messages
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-21
Common Errors
Table 6-11 lists some of the common errors associated with the Database Test and Repair
Utility.
Table 6-11. Database Test and Repair Utility Common Errors
Test Error
Hardware
Address
Hardware Address Ext _____ refers to an unrecognized module [0.0.0 Type
262]
A device has a hardware address of 0.0.0. DB Test will remove the device
and cleanup references to it.
Referential
Integrity
[Applications] / [transfer_recall_destination_device_id] contains a reference to
a device of the wrong type [DevID:1, Type 0]
[Endpoints] / [transfer_recall_destination_device_id] contains a reference to a
device of the wrong type [DevID:1, Type 0]
The Transfer Recall Destination field is not pointing to a valid device. DB Test
changes this field to point to the current device.
Boards
(Modules)
The module in bay ____ has an incorrect number of records in [DSPs].
DB Test creates the necessary records.
Static Records <BoardsInformation> contains an invalid number of records [0 instead of 16]
DB Test creates the necessary records.
Referential
Integrity
[Report...] / [report_id] contains an invalid reference to [Reports] /
[report_id][0]
DB Test removes these unneeded records.
Referential
Integrity
[PrimaryRateBoards] / [board_id] contains a reference to a module of the
wrong type [BoardID:<module ID>, Type:253]
DB Test removes this unnecessary record.
Static Records [MessagePrintFreezeOnStrings] contains an invalid number of records [0
instead of 6]
DB Test creates the necessary records.
Devices Ext ____ has no records in [CallRoutingAnnouncements]
DB Test creates the necessary records.
Boards
(Modules)
The module in bay ____ has no records in T1CallType
DB Test creates the necessary records.
Dynamic
Enumerations
[Keysets] / [attached_device_baud_rate_id] contains an invalid enumeration
value [4]