Specifications

Chapter 6: Programming
Tests and Error Messages
Page 6-18 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
Miscellaneous
This test checks for miscellaneous business rules. For a summary of possible error messages,
see Table 6-8.
Table 6-8. DB Test and Repair Error Messages for Miscellaneous
Error Message Indication
Endpoint <extension> is its own
attendant
This error message indicates that the endpoint is
programmed to serve as its own attendant. The DB
Test will set the attendant to none and the Repair
Status will show [Set to None Device]. This test
ensures that all static records are present in the
database.
Invalid Expansion Card Static Subnet
Mask Setting
Invalid Expansion Card Static Gateway
Settings
Invalid Processing Server Static Subnet
Mark Setting
Invalid Processing Server Static
Gateway Setting
Invalid Processing Server Web Server
Port Setting
The Miscellaneous Test recognizes when a
database has static subnet masks or gateways
programmed that are not the same for the
Processor Module, Expansion Card, and Processing
Server (checks fields accordingly based on system
type).
This is reported as an error, and the repair method
is to copy the subnet mask and gateway from the
Processor Module to the Expansion Card (for a
5400 or 5600 system) and the Processing Server
(for a 5600 system). This allows them to be on the
same subnet/gateway.
This test is also performed for the DHCP flag, SSH
port and enable, Web Server listening port and
enable, and listening port fields of the Processing
Server. If they do not match the Processor Module's
fields and the system is a 5600, DB Test reports the
error and repairs it, if Repair is enabled. The repair
is to copy the value for each field from the
Processor Module to the Processing Server.
The Default keymap is also validated in the Static
Records test for v2.4. If any entries of the Default
keymap are missing, DB Test reports the error and
repairs it, if Repair is enabled.