Specifications

Chapter 6: Programming
Tests and Error Messages
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-11
To run a test:
1. Enter the path and name of the database (.intl) file in the Database To Test field. (Or,
use the Browse button to locate the file.) Do one of the following:
• Select the Test to run from the list of tests in the left pane of the window. Then
select Enable or Enable/Repair from the Test drop-down menu.
• To run all tests, select Enable All or Enable/Repair All from the Test drop-down
menu.
2. If desired, set the options for the test by selecting Options from the File drop-down
menu.
3. Select Start Testing from the File drop-down menu. The results of the test are shown in
the right pane of the window.
4. If you want to save the results to a file, select Save Results from the File drop-down
menu.
Tests and Error Messages
The Database Test and Repair Utility tests include the following:
• “Associated Mailboxes” on page 6-12
• “Boards (Mitel 5000 Modules)” on page 6-13
• “Cleanup” on page 6-13
• “Devices” on page 6-14
• “Dynamic Enumerations” on page 6-15
• “Enumerations” on page 6-16
• “Extension Conflicts” on page 6-16
• “Hardware Addresses” on page 6-17
• “Miscellaneous” on page 6-18
• “Referential Integrity” on page 6-19
• “Static Records” on page 6-20