Specifications

Chapter 5: Installation
Time Slots for DEIs
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 5-171
Figure 5-62. Example DEI and External Voice Mail Connection to Base Server
NOTICE
Equipment Damage: Use adapters when connecting any 6-pin plug to an 8-pin jack.
Although a 6-pin plug will fit into an 8-pin jack, the plastic on the 6-pin plug housing will
damage pins 1 and 8 on the 8-pin jack. Not using adapters will increase the likelihood of
failure (to pins 1 and 8 in the 8-pin jack) should that jack need to be used with an 8-pin plug in
the future. Various adapter types are available based on how you choose to connect to the
patch panel.
Base Server Back
DUAL LS
DUAL SL
EXP
PAGE MOH
DEI Chassis Back
DEM-16
1 – 4 5 – 8 9 – 12 13 – 16
BAY 1
EXP 2
EXP 1
DEI Cable
Female termination
DEM-16
1 – 4 5 – 8 9 – 12 13 – 16
BAY 1
EXP 2
EXP 1
Male termination
(part number,
813.1847 or
Module-to-Chassis Fastener
into Base Server
Male termination
Female termination
Male termination
into second DEI output:
DEI 1
DEI 2
Power Cable Connector
not used
Video Card
Network Interface Card
1ST VPC
2ND VPC
Optional FAX card (not in EM)
To Mitel 5000 Base Server
Sample
or DEI (part number, 813.1806)
Depending on the
computer model
used, the card slot
arrangement and
connector locations
shown at right could
be different.
Card Slot
BUSY
ONLINE
BUSY
ONLINE
Arrangement
into first DEI input
into first
DEI output
output
or VM input (EM)
into second DEI input
or VM input (EM)
Mitel 5x00-to-VM cable
(part number, 813.1806)
813.1847-001)