Specifications

Chapter 5: Installation
Install DB Programming
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 5-161
18. Convert and test the database. Use the Mitel 5000 DB Converter utility to convert the
current database (database you saved prior to upgrading), then use the DB Test utility to
test it.
19. Restore the saved, converted, and tested database.
20. Upload the license file.
If you do not upload the software license, the system considers the license as “invalid”
and issues Alarm 125. For a complete list of alarm messages, refer to the Message Print
Diagnostics Manual, part number 550.8018.
a. From the DB Studio menu bar, select Operations – Software License Operations –
Upload Software License.
b. Enter the path and name of the license file or click Browse to search for the file.
c. Click Start. The system compares the new software license to the existing license.
For details about changing software licenses, refer to the main installation manual. If
you click Start before selecting a license (.isl), a message appears, informing you
that you have not identified a file name.
d. Click Finish. If you click Cancel, the license is not uploaded. The screen below
shows an example of a license loaded onto a Mitel CS-5200.
NOTICE
You will lose your email gateway settings if you do not convert and test the database
as indicated in this step.
IMPORTANT
With regard to the USB security key and SSL:
• The serial number is stored on the USB security key. The license
must match the serial number on this key or the upload will fail. If
for any reason you need to replace the USB security key, make
sure you upload the latest license file before replacing the key.
Attempting to upload a license file after changing the USB
security key results in an error and the system will not function.
• If the USB security key is not installed when the system reboots,
the software license will need to be uploaded.