Specifications

Chapter 5: Installation
Programming an SLA for Dual DID Trunks
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 5-141
Programming an SLA for Dual DID Trunks
You can use an SLA to install DID trunks on the Mitel 5000 platform. The trunks coming in from
the CO [local exchange] attach to the SLA that has been programmed for Dual DID functionality
on a DEM-16 port.
To program an SLA for dual DID trunks:
1. Open a session in Session Manager.
2. From the DB Studio screen, select System – Communication Server – Digital Expansion
Interface # <n> – Bay <n>: that is equipped with a Digital Endpoint Module - 16.
3. In the right-side pane, click an available Port and from the drop-down menu click Dual
DID. The Create DID Extension window displays (not shown).
4. In the Create DID Extension window (not shown), select the Starting Extension trunk
number and click OK.
5. Circuit 1 and Circuit 2 columns appear, containing the selected extension trunk numbers.
6. Connect a DID trunk into the appropriate jack on an SLA installed in accordance with
“Installing DID Trunks on an SLA (USA Only)” on page 5-139.