Specifications

Chapter 5: Installation
IP PhonePlus and Model 8660
Page 5-122 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
IP PhonePlus and Model 8660
Table 5-17. IP PhonePlus and Model 8660 Progress Displays
Display Status
WAITING FOR DOWNLOAD Awaiting Download: The boot code is waiting for a code
download.
ERASING FLASH Programming State - Erasing Flash Memory: The boot
code is receiving object code and programming the flash
memory. The endpoint first erases the flash memory and
then displays this message.
PROGRAMMING CODE Programming State - Programming Flash Memory:
After erasing the flash, the endpoint programs the flash
memory.
DOWNLOAD COMPLETED Completed State: The download completed successfully.
HARDWARE FAILURE
FLASH ERASURE
Error State – Flash Erasure: The boot code
encountered an error in erasing the flash chips. If this
occurs, try two or three downloads before returning the
endpoint for repair.
HARDWARE FAILURE
FLASH PROGRAM
Error State – Flash Program: The boot code
encountered an error while programming the flash chips.
If this occurs, try two or three downloads before returning
the endpoint for repair.
HARDWARE FAILURE
MEMORY MAP
Error State – Memory Map: The hardware memory-map
functions are not working properly. After two or three
failed attempts, you should send in the endpoint for
repair.
DOWNLOAD ABORTED
FILE TOO BIG
Error State – File Too Big: This display appears if you
attempt to download a file that is too large for the flash
memory. This error condition might indicate an incorrect
or corrupted file.
DOWNLOAD ABORTED
FILE CORRUPTED
Error State – File Corrupted: This display appears if you
attempt to download a file that is corrupted or that gets
corrupted during the transmission. This error condition
might occur during poor network conditions.