Specifications

Chapter 5: Installation
Procedure
Page 5-108 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
Procedure
To install IP endpoints, see the following sections:
• 8600-series endpoints (see below)
• 5000-series endpoints (page 5-173 as part of the upgrade procedure for this release)
To install 8600-series IP phones:
See the following illustrations for connection point examples:
• Model 8660 (page 5-110)
• Models 8600, 8620/8622, and 8662 (page 5-111)
• Model 8690 (page 5-112)
• Axxess IP PhonePlus (page 5-113)
• Eclipse IP PhonePlus (page 5-114)
1. Make sure the Inter-Tel 5000 system is up and running. Also, read “Notices” on page 5-
106.
2. Connect one end of the Ethernet cable to a PC port on the back of the endpoint.
Connect the other end of the cable to the PC, if applicable.
For the Model 8660, use unbooted Ethernet cables. The Model 8660 does not support
booted cables because the plastic “protective” ends on booted Ethernet cables get in the
way when routing the cable away from the endpoint.
3. Connect the power supply, using one of the following methods. Use CAT5 or better cable
for all LAN jack/plug connections in this procedure.
Depending on the IP devices to be used, there are several power supplies available. For
a list of power supply compatibilities for the supported IP endpoints and devices, see the
IP Device Power Supply Compatibility Matrix, part number 835.2688.
• USA/European/Universal Power Supply using a LAN Jack:
a.) Connect the LAN/POWER jack on the baseplate to the KS/SLA jack on the
24 VDC adapter.
b.) Using another cable, connect the LAN jack on the 24 VDC adapter to the
LAN.
c.) Connect the 24 VDC adapter to a 110 V wall socket. Mitel currently offers the
following power supply kits.
Table 5-15. Power Supply Kits
Part Number Contains
828.1642
• U.S. power supply, part number 806.1113
• Network cable, part number 813.1790
828.1660
• Universal power supply, part number 806.1119*
• Network cable part number 813.1790
* Requires a standard IEC (International Electrical Cord) power connector.