Specifications

Chapter 5: Installation
Software License Upload
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 5-99
Software License Upload
After you are in DB Programming, you must upload the software license. If you do not upload
the software license, the system considers the license as “invalid” and issues Alarm 125. For a
complete list of alarm messages, refer to the Message Print Diagnostics Manual, part number
550.8018.
Uploading a License
To upload a license:
1. Start a DB Programming session.
2. From the DB Studio menu bar, select Operations – Software License Operations –
Upload Software License.
3. Enter the path and name of the license file or click Browse to search for the file.
4. Click Start. The system compares the new software license to the existing license. For
details about changing software licenses, see page 5-97. If you click Start before
selecting a license (.isl), a message is displayed, informing you that you have not
identified a file name.
5. Click Finish. If you click Cancel, the license is not uploaded. The screen below shows
an example of a license loaded onto a Mitel CS-5400.
IMPORTANT
With regard to the USB security key and SSL:
• The serial number is stored on the USB security key. The license must
match the serial number on this key or the upload will fail. If for any
reason you need to replace the USB security key, make sure you upload
the latest license file before replacing the key. Attempting to upload a
license file after changing the USB security key results in an error and
the system will not function.
• If the USB security key is not installed when the system reboots, the
software license will need to be uploaded.