Specifications

Chapter 5: Installation

Terminating Cables at Digital Endpoint Locations

Page 5-64 Mitel

5000 Installation Manual – Issue 3.0, October 2008

Terminating Cables at Digital Endpoint Locations

Terminate the digital endpoint, single line endpoint, and playback device station cables on four-

conductor modular jack [six-conductor line jack unit in Europe] assemblies at the station

locations.

Do not mount the assemblies on the wall at this time; they will be wall-mounted later when the

station instruments are installed. See Figure 5-30 and Figure 5-31 on page 5-64.

Figure 5-30. Modular Jack Assembly Wiring Diagrams (U.S. System)

Figure 5-31. Line Jack Unit Assembly Wiring [European System]

IMPORTANT

If tip and ring are reversed when installing an endpoint, the endpoint will not

function.

RING

TIP

RING

RBK

For Single Line Endpoints

and Playback Devices

For Digital Endpoints and

Single-Line Adapters

For Single Line Endpoints

and Playback Devices

For Digital Endpoints and

Single-Line Adapters

WH./BL

BL/WH

WH./BL

BL/WH

EARTH

Not used