User guide

Reference
Phone Feature Codes
Mitel
®
5000 CP Administrator Phone Guide – Issue 3.2, September 2009 Page 61
Hold – System
335
Places an outside call on system hold. It can be picked up directly
at any phone that has an individual trunk button and has allowed-
answer and/or outgoing access for that trunk, or by the phone that
placed it on hold. (If used on conference or intercom calls, the
system places the call on individual hold.)
Hunt Group Remove
Hunt Group Replace
Hunt Group Remove/Replace
322
323
324
Removes the phone from its assigned hunt group(s) or places it in
again. Does not affect non-hunt group calls. The remove/replace
feature code can be used to toggle the feature.
LCD Contrast Adjustment
303
Adjusts the LCD contrast on the display. The phone must be idle to
use this feature.
Message
365
This feature code is used for leaving and retrieving a message
waiting indication at a called phone or the called phone’s message
center. Depending on how the message was left, the called phone
user either retrieves the message from his/her message center or
from the phone that left the message.
Message – Cancel
366
Allows the phone user to cancel a message waiting indication that
he or she left at another phone.
Message – Cancel Current
368
Cancels a message waiting indication that is waiting at the phone
without requiring the user to respond to it.
Message – Silent
367
Leaves a Message Waiting indication at a phone without first
placing an intercom call.
Mute On/Off
314
(Not used on single line phones) Turns the microphone on or off
during a call. If muted, the phone user can hear the other party, but
the party cannot hear the phone user.
Page
7
When followed by a paging zone code (0–9 or 0–49), it allows
announcements to be made through phone speakers and any
external paging speakers in the page zone.
Page On/Off
325
(Not used on single line phones) Halts pages through the phone
speaker or allows them to be received again.
Program Buttons
397
(Not used on single line phones) User-programmable feature
buttons and Station Speed Dial buttons can be programmed using
this feature code.
Personal Call Routing On
Personal Call Routing Off
Personal Call Routing On/Off
363
362
364
Allow the user to enable or disable the Personal Call Routing
feature (a licensed feature).
Personal Call Routing – Handoff
388
Provides the following functions:
Push: Allows the user to push an active call from his or her main
extension to an associated destination without disconnecting audio.
Pull: Allows the user connected to an active call on a mobile or
home phone to pull the call back to his or her main extension.
Program Phone Password
392
The phone password is used for the Remote Programming feature.
The password can be changed by entering the Program Phone
Password feature code at the phone or when using the Remote
Programming feature.
Table 18. Phone Feature Codes (Continued)
Feature Name Code Definition