User guide

Reference
Default Feature Codes
Page 54 Mitel
®
5000 CP Administrator Phone Guide – Issue 3.2, September 2009
Default Feature Codes
Each of the station features is assigned a feature code. Using the station’s dialpad, these codes
are entered to select trunks, process calls, and use special features. The following tables show
default feature code values:
• “Administrator Feature Codes” below
• “Diagnostics Feature Codes” on page 55
• “Phone Feature Codes” on page 58
• “Trunk Access Codes” on page 58
Administrator Feature Codes
Table 15 summarizes feature codes accessible on administrator phones only.
Table 15. Administrator Feature Codes
Feature Name
Code
U.S. (Eur.)
Definition
Clear Network Alarm
9851
Clears network-wide alarms on every node in the network, but
will not affect system alarms. The Clear Network Alarm feature
code may be entered on any node in the network, but the Send
Network Alarms flag must be set for the administrator to clear
alarms on other nodes in the network.
Clear System Alarm
9850
Clears all local and network-wide system alarm displays on your
node.
Diagnostics On/Off
9900 (9100)
Enables or disables system diagnostics mode to perform
diagnostics functions such as freezing or unfreezing the
database, printing message logs, and seizing a device for
troubleshooting purposes.
Because diagnostics mode affects system performance, you
should run the diagnostics program when the system is idle.
Enable Network Day
9862
Places any or all remote nodes into day mode (you are prompted
for the node number).
Enable Network Night
9861
Places any or all remote nodes into night mode (you are
prompted for the node number).
Modem Disable
9867
Disables the internal modem; used in conjunction with the
assigned extension number of the modem.
Modem Enable
9866
Enables the internal modem; used in conjunction with the
assigned extension number of the modem.
Modem Reset
9869
Resets the internal modem when the modem fails to answer an
incoming call or to synchronize with an external modem.
Night Ring On/Off
9860
Places system in night mode or cancels night mode. While in
night mode, the night toll and trunk restriction lists are used.
NOTICE
Database corruption could occur if the modem is reset during
a DB Programming session. Mitel recommends that you
assign the modem extension to a Speed Dial button.