User guide

Phone and System Administration
Programming Trunk Group Trunk Lists
Page 36 Mitel
®
5000 CP Administrator Phone Guide – Issue 3.2, September 2009
Figure 3. Trunk Database Programming Flowchart
Enter
feature code
Press 3 or TRUNK menu button
ENTER DATABASE OPTION
ENTER TRUNK OPTION
Press 1 or INDIVIDUAL TRUNK
ENTER TRUNK EXTENSION
YOUR INPUT
PHONE DISPLAYS
menu button
Press 2 or TRUNK GROUP
ENTER TRUNK GRP EXTENSION
menu button
SEE NEXT PAGE
Type the trunk
extension number
ANS SUPERVISION OPTION
Press 1 or POLARITY
REVERSE menu button
Press 2 or VALID
CALL menu button
SET CALLER ID
Press 1 or ON
menu button
Press 2 or OFF
menu button
HYBRID BALANCE OPTION
ENTER SIGNALING OPTION
Press 1 or DTMF
menu button
Press 2 or PULSE
menu button
ENTER TRUNK GRP EXTENSION
MARK TRUNK BUSY
Press 1 or
ANSWER SUPERVISION
menu button
Press 2 or
CALLER ID
menu button
Press 3 or
HYBRID BALANCE
menu button
Press 4 or
SIGNALLING
menu button
TRUNK GROUP
menu button
INDIVIDUAL TRUNK OPTION
Press 6 or
TRUNK BUSY
menu button
Enter the trunk group number
Press 1 or ON
menu button
Press 2 or OFF
menu button
Press 5 or
Press 3 or VALID +
POLARITY menu button
At any time, you can press
* to return to the previous
menu, or press the Speak-
er button to exit program-
ming and cancel any
unsaved changes.
Press # or the ACCEPT
menu button to save
changes.
INFORMATION IN THIS
CHART IS SHOWN AS
FOLLOWS:
Program Database
9932 (9132)
Enter option
number or select
option to program
by scrolling