User guide

Phone and System Administration
Programming Trunk Group Trunk Lists
Mitel
®
5000 CP Administrator Phone Guide – Issue 3.2, September 2009 Page 35
Programming Trunk Group Trunk Lists
You can program a list of trunks for a trunk group.
To program trunk group trunk lists:
1. Dial 9932 (9132 in Europe). If a password is required (see page 19), ENTER
PASSWORD appears (otherwise, go to step 3).
2. Enter the password, and then press #. ENTER DATABASE OPTION (1 - 3) appears.
3. Press 3 or the TRUNK menu button. ENTER TRUNK OPTION appears.
4. Press 2 or the TRUNK GROUP menu button. ENTER TRUNK GROUP EXTENSION
appears.
5. Enter the extension number, or enter a partial extension number, and then press # or the
ACCEPT menu button. The extension information that best matches the partial number
appears. You can use the Volume buttons or the NEXT and PREVIOUS menu buttons to
scroll through entries.
6. Press # or the ACCEPT menu button to accept the entry. ENTER TRUNK GROUP
OPTION (1 - 6) appears.
7. Press 6 or the TRUNK LIST menu button. ENTER TRUNK EXTENSION appears.
8. Enter the extension number, or enter a partial extension number, and then press # or the
ACCEPT menu button. The extension information that best matches the partial number
appears. You can use the Volume buttons or the NEXT and PREVIOUS menu buttons to
scroll through entries.
9. Press # or the ACCEPT menu button to accept the entry.
10. The display shows the extension number and a Yes/No menu. To include the phone in
the list, press 1 or the YES menu button followed by #. To exclude the phone from the
list, press 2 or the NO menu button followed by #. DATABASE UPDATED followed by
ENTER TRUNK EXTENSION appears.
11. Select another extension number. Or, if you are finished programming the phone list,
press # or the ACCEPT menu button.
12. When you are finished with all programming, press the Speaker button or # repeatedly to
exit the programming session.
NOTE
At any time, you can press
*
to return to the previous menu, or press the Speaker
button to exit the programming session and cancel any unsaved changes.