User guide

Phone and System Administration
Programming the Trunk Answer Supervision Type
Page 26 Mitel
®
5000 CP Administrator Phone Guide – Issue 3.2, September 2009
To program the Answer Supervision Type:
1. Dial 9932 (9132 in Europe). If a password is required (see page 19), ENTER
PASSWORD appears (otherwise, go to step 3).
2. Enter the password, and then press #. ENTER DATABASE OPTION (1 - 3) appears.
3. Press 3 or the TRUNK menu button. ENTER TRUNK OPTION appears.
4. Press 1 or the INDIVIDUAL TRUNK menu button. ENTER TRUNK EXTENSION
appears.
5. Enter the extension number, or enter a partial extension number, and then press # or the
ACCEPT menu button. The extension information that best matches the partial number
appears. You can use the Volume buttons or the NEXT and PREVIOUS menu buttons to
scroll through entries.
6. Press # or the ACCEPT menu button to accept the entry.
7. Press 1 or the ANS SUPERVISION menu button. ANS SUPERVISION OPTION (1 - 3)
appears.
8. Select one of the following:
• Press 1 or the POLARITY-REVERSE menu button for the polarity-reversal
supervision type.
• Press 2 or the VALID CALL menu button for Valid Call timer supervision.
• Press 3 or the VALID + POLARITY menu button for Valid Call timer with Polarity
Reversal supervision.
9. Press # or the ACCEPT menu button to accept the entry. DATABASE UPDATED
appears.
10. When you are finished with all programming, press the Speaker button or # repeatedly to
exit the programming session.
NOTE
At any time, you can press
*
to return to the previous menu, or press the Speaker
button to exit the programming session and cancel any unsaved changes.