User guide

Phone and System Administration
Synchronizing Network Times
Page 10 Mitel
®
5000 CP Administrator Phone Guide – Issue 3.2, September 2009
Synchronizing Network Times
You can synchronize the minutes past the hour across a network configuration without changing
the hour. This is useful when nodes are in different time zones. If a node time is off by more
than 30 minutes, synchronizing the minutes may cause the hour to change. Also, network time
is automatically synchronized every day at 12:30 A.M. (00:30), using the time setting on the
lowest node number.
To synchronize the clocks in all nodes in the network:
Dial 9811. NETWORK TIME SYNCHRONIZED appears.
NOTE
If enabled, an NTP synchronization overrides the 5000 CP system synchronization
on any node that has NTP enabled (see “System Date and Time” above). Contact
your system administrator for more information.