User guide

Reference
Diagnostics Feature Codes
Mitel
®
5000 CP Administrator Phone Guide – Issue 5.0, February 2011 Page 59
Diagnostics Feature Codes
You must use the administrator phone and enter the Diagnostics Mode feature code (9900)
[9100 in Europe] before you can use the feature codes summarized in Table 22.
Periodic Diagnostics
On/Off
9825
Periodic diagnostics extends and improves the functionality and
checks and reconciliations performed on various resources in the
system.
Program System Speed
Dial
9801
Programs system-wide Speed Dial numbers when followed by
location codes (000–999 or 0000-4999).
Set Network Date/Time
9810
Programs the time and date for all nodes in the system. Local
time and date can also be reset by individual nodes.
Set Time/Date
9800
Programs system time and date.
Synchronize Network Time
9811
Synchronizes the minutes past the hour across the network.
If a node's time is off by more than 30 minutes, synchronizing the
minutes may cause the hour to change. Also, network time is
automatically synchronized every day at 12:30 AM (00:30), using
the time setting on the node with the lowest number.
Table 21. Administrator Feature Codes (Continued)
Feature Name
Code
U.S. (Eur.)
Definition
Table 22. Diagnostics Feature Codes
Feature Name
Code
U.S. (Eur.)
Definition
Compression On/Off
9982 (9182)
Compresses call processing messages sent to DB Programming,
speeding up transfers. You should not disable this feature unless
instructed to do so by support personnel.
Compression Statistics
9981 (9181)
Dumps various statistics related to the DB Programming
compression algorithm. This feature should be used only when
directed to do so by support personnel.
Diagnostic –
ASAI Snoop Off
9926 (9126)
Turns off the ASAI output to Message Print. ASAI is the protocol
the system uses to talk to DB Programming and the AVDAP.
Turning this feature on helps the support personnel debug the
messaging between Call Processing and DB Programming or Call
Processing and the AVDAP.
Diagnostic –
ASAI Snoop On
9927 (9127)
Turns on the ASAI output to Message Print. ASAI is the protocol
the system uses to talk to DB Programming and the voice
processing system. Turning this feature on helps the support
personnel debug the messaging between Call Processing and DB
Programming or Call Processing and the AVDAP.
Diagnostic –
Dump Extension
9933 (9133)
Allows a field technician to dump a device or structure when
debugging a problem. The system dumps the internal data
structures for that extension to message print. If you press the
pound button (#) you are prompted for a command. The command
allows you to enter an alphanumeric string of the structure to
dump.