User guide

Phone and System Administration
Programming the Hybrid Balance Option
Page 32 Mitel
®
5000 CP Administrator Phone Guide – Issue 5.0, February 2011
Programming the Hybrid Balance Option
A field technician runs a Hybrid Balance Test to ensure that analog trunks connected to the
5000 CP have the best hybrid balance settings. You can change the hybrid balance setting for
individual trunks.
To program the Hybrid Balance Option:
1. Dial 9932 (9132 in Europe). If a passcode is required (see page 23), ENTER
PASSCODE appears (otherwise, go to step 3).
2. Enter the passcode, and then press #. ENTER DATABASE OPTION (1 - 3) appears.
3. Press 3 or the TRUNK menu button. ENTER TRUNK OPTION appears.
4. Press 1 or the INDIVIDUAL TRUNK menu button. ENTER TRUNK EXTENSION
appears.
5. Enter the extension number, or enter a partial extension number, and then press # or the
ACCEPT menu button. The extension information that best matches the partial number
appears. You can use the Volume buttons or the NEXT and PREVIOUS menu buttons to
scroll through entries.
6. Press # or the ACCEPT menu button to accept the entry.
7. Press 3 or the HYBRID BALANCE menu button. HYBRID BALANCE OPTION (0 - 7)
appears.
8. Enter the Hybrid Balance option (0 to 7), or use the Volume buttons or the NEXT and
PREVIOUS menu buttons to scroll through entries.
9. Press # or the ACCEPT menu button to accept the entry. DATABASE UPDATED
appears.
10. When you are finished with all programming, press the Speaker button or # repeatedly to
exit the programming session.
NOTE
At any time, you can press
*
to return to the previous menu, or press the Speaker
button to exit the programming session and cancel any unsaved changes.