User guide

Mitel 6869i SIP Phone Release 4.0.0 SP1 User Guide

CONFIGURING A BLF/LIST KEY USING THE MITEL WEB UI

If you set a key to use BLF/List, you must also enter a BLF List URI at Operation > Softkeys

and XML > Services. The BLF List URI is the name of the BLF list defined on the BroadSoft

BroadWorks Busy Lamp field page for your particular user. For example,

sip:9@192.168.104.13. The value of the BLF List URI parameter must match the list name

configured. Otherwise, no values display on the 6869i screen and the feature is disabled.

1. Click on Operation > Softkeys and XML.

Click on Operation > Expansion Module <N>.

Softkeys

2. Select from Key 1 through Key 44 on the Top keys.

3. In the Type field, select BLF/List (BroadSoft BroadWorks).

4. In the Line field, select a line number that is actively registered to the appropriate SIP proxy

you are using. Valid values are:

• global

• 1 through 24

5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this

softkey.

6. In the BLF List URI field, enter the name of the BLF list defined on the BroadSoft Broad-

Works Busy Lamp field page for your particular user. For example, sip:9@192.168.104.13.

MITEL WEB UI

Note: The Label and Value field are not required. The BroadWorks BLF/List name is

configured in the BLF List URI field instead.

Note: Contact your System Administrator for the BLF List URI.