User guide

Mitel 6869i SIP Phone Release 4.0.0 SP1 User Guide

5. Select a value from the Line N field.

6. Click Save Settings.

Installing Custom Ring Tones Using the Mitel Web UI

1. Click on Basic Settings > Custom Ringtones

2. Press the Browse... button corresponding to the desired ringtone position (e.g. 1).

3. Navigate to the folder containing the WAV file you want to upload, select the file using your

left mouse button, and press the Open button.

The filename should now be displayed to the right of the respective Browse... button.

4. Press the Upload button to upload the file to the phone.

5. Repeat Steps 2 to 4 to upload additional WAV files to the phone.

Note: See the “Ring Tones” on page 64 for valid values.

Notes:

1. Access to the Custom Ringtones Web UI menu is only available if enabled by your

System Administrator.

2. Ringtones must be in .wav format. The IP phones support the following WAV file

specifications:

•G.711 μ-law and a-law Codec

• 20 ms packet size

• Mono 8KHz

3. Individual WAV files cannot exceed 1 MB in size (the total combined size of the eight

WAV files cannot exceed 8 MB).

4. Filenames must contain only ASCII characters.

MITEL WEB UI

Note: Press the Delete button to delete the desired ringtone from your phone.