User guide

Customizing Your Phone
61
AUDIO
The Audio option on the IP phone allows you to set the audio mode for your IP phone, configure
headset settings, and personalize ring tones and tone sets.
AUDIO MODE
The 6869i allows you to use a handset, a headset, or handsfree mode to handle incoming and
outgoing calls. The Audio Mode option provides different combinations of these three methods
to provide maximum flexibility in handling calls. There are four audio mode options you can set:
Configuring the Audio Mode Using the IP Phone UI
1. Press on the phone to enter the Options List.
2. Navigate to the Audio > Audio Mode option and press the button or Select softkey.
AUDIO MODE
OPTION DESCRIPTION
Speaker This is the default setting. Calls can be made or received using the handset or
handsfree speakerphone. In handset audio mode, pressing the button
on the phone switches to handsfree speakerphone. In Speaker audio mode, lift
the handset to switch to the handset.
Headset Choose this setting if you want to make or receive all calls using a handset or
headset. Calls can be switched from the handset to headset by pressing
the button on the phone. To switch from the headset to the handset, lift
the handset.
Speaker/Headset Incoming calls are sent to the handsfree speakerphone first when the
button is pressed. By pressing the button again, you can switch back and forth
between the handsfree speakerphone and the headset. At anytime, lifting the
handset switches back to the handset from either the handsfree speakerphone
or the headset.
Headset/Speaker Incoming calls are sent to the headset first when the button is pressed.
By pressing the button again, you can switch back and forth between the
headset and the handsfree speakerphone. At anytime, lifting the handset
switches back to the handset from either the headset or the handsfree
speakerphone.
IP PHONE UI