User guide

Mitel 6869i SIP Phone Release 4.0.0 SP1 User Guide
48
SET DATE AND TIME
Configuring the Date and Time Using the IP Phone UI
With a valid time server enabled your IP phone will synchronize the time displayed with the
specified configuration server. The phone will use the time from Time Server 1 unless it is not
configured or unavailable, in which case it will move on to Time Server 2, and if necessary Time
Server 3.
1. Press on the phone to enter the Options List.
2. Navigate to the Time and Date > Set Date and Time option and press the button or
Select softkey.
3. If you want to synchronize the time and date using a time server, ensure there is a check-
mark in the box corresponding to the Use Network Time setting. If there is no checkmark,
press the button to enable the Use Network Time setting.
a. Press the 2 key to highlight Time Server 1, Time Server 2, or Time Server 3.
b. Using the keys on the dialpad, enter an IP address or domain name for the time server.
Use the Backspace key to move back a space and delete a character. Use the Dot
softkey to enter dots within the IP address or domain name. Use the 123 4 softkey to
toggle between entering numbers and entering letters.
4. If you want to manually set the date and time, press the button to clear the checkmark
from the Use Network Time box and disable the setting.
a. Press the 2 key to highlight Enter Time or Enter Date.
IP PHONE UI