User guide

Configuring Softkeys
103
SPRECODE KEY
You can set a key to automatically activate specific services offered by the server by setting a
key to Sprecode. For example, if the sprecode value of *82 is configured, then by pressing the
key, *82 automatically activates a service provided by the server. The value you enter for this
field is dependent on the services provided by the server. Contact your System Administrator
for information about available services.
CONFIGURING A SPRECODE KEY USING THE MITEL WEB UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 44 on the Top keys.
or
Select from Key 1 through Key 24 on the Bottom keys.
3. In the Type field, select Sprecode.
4. In the Label field, enter a label to display on the IP phone for this key.
5. In the Value field, enter the appropriate value for accessing specific services from the
server.
6. In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
Expansion Module Keys
7. Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
8. In the Type field, select Sprecode.
MITEL WEB UI
Note: For values to enter in this field, contact your System Administrator.