User guide
Table Of Contents
- Software License Agreement
- Content
- Welcome
- IP Phone Keys
- Getting Started
- Methods of Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line and Call Appearances
- Presence Key
- Configuring Softkeys
- State-Based Softkeys
- Softkey Display Behavior
- Line Key
- Speed Dial Key
- Do Not Disturb (DND) Key
- Busy Lamp Field (BLF) Key
- BLF/List Key
- Automatic Call Distribution (ACD) Key (for Sylantro Call Managers)
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Call Forward Key
- BLF/Xfer
- Speed Dial/Xfer
- Speed Dial/Conf
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Phone Lock Key
- Paging Key
- Empty Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Shared Call Appearance (SCA) Call Bridging
- Star Codes
- Other Features
- Model M680i Expansion Module
- Troubleshooting Solutions
- Why is my display blank?
- Why is my speakerphone not working?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
- Index
- Disclaimer
Customizing Your Phone
38 41-001524-00 REV00 – 04.2014
3. If you want to synchronize the time and date using a time server, ensure there is a checkmark in the box corresponding
to the Use Network Time setting. If there is no checkmark, press the button to enable the Use Network Time
setting.
a) Press the 2 key to highlight Time Server 1, Time Server 2, or Time Server 3.
b) Using the keys on the dialpad, enter an IP address or domain name for the time server.
Use the Backspace key to move back a space and delete a character. Use the Dot softkey to enter dots within the
IP address or domain name. Use the 123 4 softkey to toggle between entering numbers and entering letters.
4. If you want to manually set the date and time, press the button to clear the checkmark from the Use Network
Time box and disable the setting.
a) Press the 2 key to highlight Enter Time or Enter Date.
b) Using the keys on the dialpad, change the time and date accordingly.
When entering the time, use the AM/PM softkey to toggle between AM and PM.
5. Press the Save softkey to save your changes.