User guide

Line Keys and Programmable Keys
81
INTERCOM KEY
By default, the IP phone allows incoming intercom calls to be automatically answered without
having to set up an Icom key on your phone.
Your System Administrator can enable outgoing intercom calls on your phone. If enabled, you
must configure an Icom key on your phone to use for outgoing intercom calls. You must configure
a programmable key with the function, Icom.
CONFIGURING AN INTERCOM KEY
1. Click on Operation > Programmable Keys.
2. Select from Key 1 through Key 3.
3. In the Type field, select Icom.
4. Click Save Settings.
USING THE ICOM KEY
1. Press the Icom key.
2. Enter the extension number of the person you want to intercom.
3. After a beep tone, your phone automatically connects with the remote extension and you
can speak through its speaker.
4. To cancel intercom, press or hang up the handset.
5. When you are finished speaking, hang up the phone by placing the handset back on-hook
or by pressing . When you hang up, the remote phone also hangs up.
Note: For more information about changing the behavior of incoming Intercom calls,
see the section “Incoming Intercom Call Features” on page 144.
MITEL WEB UI
IP PHONE UI