User guide

Line Keys and Programmable Keys
63
EDITING SPEED DIAL KEYS
On the 6863i, you can edit a speed dial key using any of the following methods:
• Using the Mitel Web UI at the path:
• Operation > Programmable Keys
• Operation > Keypad Speed Dial
• Using the IP phone UI at the path:
• Options > Preferences > Speed Dial Edit.
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Speed Dial Edit.
4. Press a speed dial key you want to edit.
The speed dial edit screen displays.
5. Edit the speed dial information as applicable and press 4Save.
Note: A speed dial key must be already configured on the phone to edit the key.
IP PHONE UI
Notes:
1. If a number on the keypad is setup as a speed dial key, pressing the applicable
number in the speed dial editing process also displays the speed dial edit screen.
The edit screen allows you to change the Speed Dial Number and Line setting.
2. If you press a key that is NOT setup as a speed dial key, the phone displays an
Invalid Key message. However, if you press an empty keypad key or
programmable key that is set to None, it initiates the Add a Speed Dial Key
process allowing you to setup a new speed dial key.
Notes:
1. You can cancel out of the speed dial editing process at any time without saving,
by pressing the key.
2. On the 6863i, you can remove the speed dial key by erasing the speed dial
number digits (leaving the speed dial value blank) and then pressing 4Save.
Use the 3 key to delete the digits.