Installation guide

Administrator Level Options
3-42 41-001561-00 REV00 – 10.2014
You can set these parameters using the configuration files or the Mitel Web UI.
Reference
For more information about setting the Action URIs for XML applications, see “Action URIs” on page5-207.
XML SIP Notify Events and Action URIs
In order for an XML push to bypass the NAT/firewall, the phone supports a proprietary SIP NOTIFY event (aastra-xml) with
or without XML content.
If XML content is provided in the SIP NOTIFY, it is processed directly by the phone as it is done for an XML PUSH.
Reference
For more information about enabling the XML SIP Notify on the IP Phones, see Chapter 5, the section, “XML SIP Notify
Events” on page5-217.
Polling Action URIs
Another way to reach a phone behind a NAT/firewall is to have the phone make an XML call at periodic intervals. An
Administrator can use the action uri poll to command the phone to perform an XML call at configurable intervals.
An Administrator can specify the URI to be called and specify the interval between polls. Configuration of this feature is
dynamic (no reboot required).
Reference
For more information about configuring the polling and polling interval of Action URIs, see “Polling Action URIs” on
page5-213.
Connected Specifies the URI for which the phone executes an HTTP GET when it goes into the “connected” state. This includes regular
phone calls, intercom calls, paging calls, RTP streaming, and the playing of a WAV file. It is also triggered when the phone
establishes the second leg of a 3-way call.
Disconnected Specifies the URI that the phone executes a GET on, when it transitions from the incoming, outgoing, calling, or con-
nected state into the idle state.
XML SIP Notify Specifies the URI to be called when an empty XML SIP NOTIFY is received by the phone.
Poll Specifies the URI to be called every "action uri poll interval" seconds.
Poll Interval Specifies the interval, in seconds, between calls from the phone to the "action uri poll".
Action URI Description