Installation guide

Administrator Level Options
3-40 41-001561-00 REV00 – 10.2014
Line Settings
An administrator can configure multiple lines on the IP phone with the same SIP network configuration (global) or a dif-
ferent SIP network configuration (per-line).
The following table provides the number of lines available for each IP phone
model.
On the IP Phones, you can configure the following on a per-line basis using the configuration files or the Mitel Web UI:
• Basic SIP Authentication Settings
• Basic SIP Network Settings
• Advanced SIP Settings (Missed Call Summary Subscription only)
• RTP Settings (DTMF Method and RTP Encryption only)
• Autodial Settings (On a per-line basis, you can also enable/disable the “Use Global Settings” parameter).
References
For more information about configuring the features listed above on a per-line basis, see Chapter 4, the sections:
• “Basic SIP Settings” on page4-49
• “Advanced SIP Settings (optional)” on page4-63
• “Real-time Transport Protocol (RTP) Settings” on page4-68
• “Autodial Settings” on page4-77
IP Phone Model Available Lines
6863i 2
6865i 9
6867i 9
6869i 9