Installation guide

Advanced Operational Parameters
41-001561-00 REV00 – 10.2014 A-235
XSI Speed Dial 8 and Call Log Settings
Parameter –
recording periodic beep
Configuration Files
aastra.cfg, <mac>.cfg
Description Specifies how often (in seconds) the periodic beep tone (notifying users that their call is
being recorded) should be played.
Format Integer
Default Value 15 (seconds)
Range 0 (Disabled)
15
30
45
60
Example recording periodic beep: 30
Parameter –
recording beep direction
Configuration Files
aastra.cfg, <mac>.cfg
Description Specifies where the periodic beep tone (notifying users that their call is being recorded)
should be played.
Format Integer
Default Value 1 (Network)
Range 0-2
0 (Local)
1 (Network)
2 (Both Local and Network)
Example recording beep direction: 2
Note:
Applicable to the 6867i and 6869i IP Phones only.
Parameter–
xsi user name
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the user name used for authentication of the XSI account.
Format <username>@<server>
Default Value N/A
Range N/A
Example xsi user name: [e-mail]
Parameter –
xsi ip
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the IP address or Fully Qualified Domain Name (FQDN) of the XSI server.
Format IP address or FQDN.
Default Value N/A
Range N/A
Example xsi ip: xsp.xsi.broadworks.net