Installation guide

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
A-206 41-001561-00 REV00 – 10.2014
Configurable Display Modes for BLF and BLF/List Softkey Labels
Configurable Display for Blank BLF/List Softkeys
Range 0-3
0 (disabled)
1 (switch page if monitored extension transitions to ringing (fast flashing) state)
2 (switch page if monitored extension transitions to either ringing (fast flashing) or
hold (slow flashing) state)
3 (switch page if monitored extension transitions to either ringing or hold state OR
from idle (off) state to “in call” (solid) state)
Example blf activity page switch: 1
Note:
Applicable to the 6867i and 6869i IP Phones only.
Parameter–
blf display label to max
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies how the phone should display BLF and BLF/List softkey labels.
In the primary (default) display mode, when a label exceeds the maximum characters the
respective phone’s screen can display, the phone adds an ellipsis (i.e. “...”) at the end of the
label indicating the label has been automatically truncated.
In the secondary display mode, the phone does not automatically truncate the label and
simply displays as many characters as the area reserved for the label allows.
Format Boolean
Default value 0 (Primary Display Mode)
Range 0 - 1
0 (Primary Display Mode)
1 (Secondary Display Mode)
Example blf display label to max: 1
Note:
Applicable to the 6867i and 6869i IP Phones only.
Parameter–
keys noname symbol
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description By default, when softkeys are configured as BLF/List keys on the phone but there are not
enough members in the BLF/List on the BroadSoft server side, then a series of question marks
(i.e. “? ???”) are displayed on screen beside some of the softkeys. The question marks can be
replaced with a different symbol/character by defining this parameter.
Format Any character placed within quotation marks
Default value “?”
Range Any character (can be left empty as well)
Example keys noname symbol: “e”