Installation guide

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
A-196 41-001561-00 REV00 – 10.2014
Parameter –
expmodX keyN line
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description This is the line associated with the softkey you are configuring on the Expansion Module.
The number of applicable lines available is dependent on the specific IP phone model.
The “expmodX keyN line” parameter can be set for the following softkey types only:
• speeddial
• blf
• list
• acd
• lcr
• blfxfer
• speeddialxfer
• speeddialconf
• redial
Format Integer
Default Value 1
Range 1 through 9
Example expmod1 key1 line: 1
expmod1 key2 line: 5