Installation guide

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
A-194 41-001561-00 REV00 – 10.2014
Parameter –
expmodX keyN label
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The text label that displays on the softkey for the Expansion Module.
The “expmodX keyN label” parameter can be set for the following softkey types only:
• line
• speeddial
• blf
• acd
• xml
• flash
• sprecode
• park
• pickup
• blfxfer
• speeddialxfer
• speeddialconf
• directory
• callers
• redial
• conf
• xfer
• icom
• services
• paging
Note:
If the expmodXkeyN type parameter is set to "flash", and no label value is entered for the
expmodXkeyN label parameter, the label of "Flash" is used.
Format Text
Default Value Not Applicable
Range For line, blf types - Up to 9 characters.
For speeddial type - Up to 11 characters.
Example expmod1 key1 label: “Line 9”
expmod2 key1 label: “info”
expmod3 key1 label: “johnsmith”