Installation guide

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
A-192 41-001561-00 REV00 – 10.2014
Expansion Module Key Settings for M680i and M685i
Parameter –
expmodX keyN type
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The type of softkey to configure. Valid types are:
• none - Indicates key is disabled.
• line - Indicates key is configured for line use.
• speeddial - Indicates key is configured for speeddial use. You can configure a key to
speeddial a specific number by pressing that key. Optionally, you can also configure a
Speeddial key to dial prefix numbers. With this option, the prefix numbers automati-
cally dial when you press the key, and the phone waits for you to enter the remaining
numbers to dial out.
Note: When there is an active call, the Speeddial keys send DTMF digits through the
active voice path. To dial out, you have to first put the active call on hold and then
press the Speeddial key.
• dnd - Indicates key is configured for do not disturb on the phone. This option is "Do
Not Disturb" in the Mitel Web UI). You must also set the DND key mode (see “DND Key
Mode” on page5-71 and “DND Key Mode Settings” on pageA-144 for details).
• blf - Indicates key is configured for Busy Lamp Field (BLF) use. User can dial out on a
BLF configured key. A maximum of 50 BLFs are applicable to the M685i and a maxi-
mum of 48 BLFs are applicable to the M680i.
• list - Indicates key is configured for BLF/List use. (This option is BLF/List in the Mitel
Web UI). User can dial out on a BLF/List configured key. You can also use the “BLF List
URI” parameter to specify a URI for the phone to access for the BLF/List.
• acd - (for Sylantro/BroadWorks servers only) Indicates the key is configured for Auto
Call Distribution (called “Auto Call Distribution” in the Mitel Web UI). The ACD feature
allows the Sylantro/BroadWorks server to distribute calls from a queue to registered IP
phone users (agents).
• xml - Indicates the key is configured to accept an XML application for accessing cus-
tomized XML services. You can also specify an XML key URL for this option.
• flash - Indicates the key is set to generate a flash event when it is pressed. The IP
phone generates flash events only when a call is connected and there is an active RTP
stream (for example, when the call is not on hold).
• sprecode - Indicates the key is configured to automatically activate specific services
offered by the server. For example, if the sprecode value of *82 is configured, then by
pressing the key, *82 automatically activates a service provided by the server.
• park - Indicates the key is configured to park incoming calls when pressed.
• pickup - Indicates the key is configured to pick up parked calls when pressed.
• lcr - Indicates the key is configured for “last call return” when pressed.
• callforward - Indicates the key is configured for accessing the Call Forward features
on the phone. A Call Forwarding Mode must be enabled to use this tkey. “Account”
mode is the default.
• blfxfer - Indicates the key is configured to transfer calls AND configured for BLF on a
single key.
• speeddialxfer
- Indicates the key is configured to transfer calls AND configured for
speeddial
ing to a specific number.
• speeddialconf - Indicates the key is configured to be used as a Speeddial key AND as
a Conference key.
• directory - Indicates the key is set for accessing the Directory List.
• callers - Indicates the key is configured to access the Callers List.
• redial - Indicates the key is configured to access the Redial List.
• conf - Indicates the key is configured as a Conference key.
• xfer- Indicates the key is configured as a Transfer key for transferring calls.
• icom - Indicates the key is configured to be used as the Intercom key.
• services - Indicates the key is set to be used as the Services key.
• phonelock - Indicates the key is set to be used to lock/unlock the phone.
• paging - Indicates the key is set for Group Paging on the phone. Pressing this key
automatically sends a Real Time Transport Protocol (RTP) stream to pre-configured
multicast address(es) without involving SIP signaling.
• empty - Indicates the key is configured to force a blank entry on the IP phone display
for a specific key.
Format Text
Default Value none