Installation guide

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
41-001561-00 REV00 – 10.2014 A-183
Programmable Key Settings
The value of "N" for the following parameters is dependent on the number of programmable keys available on the 6863i
and 6865i phone models. See the table on page A-174 for the applicable values. Available programmable key types are
dependent on the IP phone model. Please refer to the resepective model’s User Guide for the model’s available program-
mable key types.
Note:
Applicable to the 6863i and 6865i IP phones only. Available fucntions vary by IP phone model.
Parameter –
prgkeyN type
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The type of programmable key to configure. Valid types are:
• none - Indicates key is disabled.
• line - Indicates key is configured for line use.
• speeddial - Indicates key is configured for speeddial use. Speeddial is applicable to
the M680 and M685i also. You can configure a key to speeddial a specific number by
pressing that key. Optionally, you can also configure a Speeddial key to dial prefix
numbers. With this option, the prefix numbers automatically dial when you press
the key, and the phone waits for you to enter the remaining numbers to dial out.
Note: When there is an active call, the Speeddial keys send DTMF digits through the
active voice path. To dial out, you have to first put the active call on hold and then
press the Speeddial key.
• dnd - Indicates key is configured for do not disturb on the phone. This option is "Do
Not Disturb" in the Mitel Web UI). You must also set the DND key mode (see “DND
Key Mode” on page5-71 and “DND Key Mode Settings” on pageA-144 for details).
• blf - Indicates key is configured for Busy Lamp Field (BLF) use. User can dial out on a
BLF configured key. A maximum of 50 BLFs are applicable to the M685i and a maxi-
mum of 48 BLFs are applicable to the M680i.
• list - Indicates key is configured for BLF/List use. (This option is BLF/List in the Mitel
Web UI). User can dial out on a BLF/List configured key. You can also use the “BLF
List URI” parameter to specify a URI for the phone to access for the BLF/List.
• acd - (for Sylantro/BroadWorks servers only) Indicates the key is configured for Auto
Call Distribution (called “Auto Call Distribution” in the Mitel Web UI). The ACD fea-
ture allows the Sylantro/BroadWorks server to distribute calls from a queue to regis-
tered IP phone users (agents).
• xml - Indicates the key is configured to accept an XML application for accessing cus-
tomized XML services. You can also specify an XML key URL for this option.
• flash - Indicates the key is set to generate a flash event when it is pressed. The IP
phone generates flash events only when a call is connected and there is an active
RTP stream (for example, when the call is not on hold).
• sprecode - Indicates the key is configured to automatically activate specific services
offered by the server. For example, if the sprecode value of *82 is configured, then by
pressing the key, *82 automatically activates a service provided by the server.
• park - Indicates the key is configured to park incoming calls when pressed.
• pickup - Indicates the key is configured to pick up parked calls when pressed.
• lcr - Indicates the key is configured for “last call return” when pressed.
• callforward - Indicates the key is configured for accessing the Call Forward features
on the phone. A Call Forwarding Mode must be enabled to use this tkey. “Account”
mode is the default.
•
blfxfer - I
ndicates the key is configured to transfer calls AND configured for BLF on
a single key.
• speeddialxfer - Indicates the key is configured to transfer calls AND configured for
speeddialing to a specific number.
• speeddialconf - Indicates the key is configured to be used as a Speeddial key AND
as a Conference key.
• directory - Indicates the key is configured to access the Directory List.