Installation guide

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
A-182 41-001561-00 REV00 – 10.2014
Option to Remove the “More” Softkey when Not Required
Note:
Applicable to the the 6867i and 6869i IP phones only.
Parameter –
collapsed more softkey screen
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Controls how softkeys are displayed on the 6867i and 6869i IP phones’ screens when
the number of softkeys configured matches the exact number of softkey buttons on the
phone.
By default, when a total of six top softkeys and four bottom softkeys are configured for
the 6867i IP phone, the screen displays five top softkeys, four bottom softkeys and
“More” options to access the remaining softkeys. When this parameter is enabled, the
“More” softkeys arer emoved allowing the phones to display all configured top and
bottom softkeys on one screen.
The same behavior is applied to the 6869i when 12 top softkeys or 5 bottom softkeys
are configured.
Format Integer
Default Value 0 (Disabled)
Range 0-1
0 (Disabled)
1 (Enabled)
Example collapsed more softkey screen: 1