Installation guide

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
A-174 41-001561-00 REV00 – 10.2014
Softkey/Programmable Key/Keypad Key/Expansion
Module Key/Hard Key Parameters
This section provides the softkey, programmable key, keypad key, and expansion module key parameters you can con-
figure on the IP phones. The following table provides the number of keys you can configure for each model phone and
expansion module, and the number of lines available for each type of phone.
*The M680i expansion module consists of 16 softkeys. You can have up to 3 expansion modules on an IP phone totalling
48 softkeys. Valid for 6865i , 6867i, and 6869i phones.
**The M685i expansion module consists of 3 pages of 28 softkeys (for a total of 84). You can have up to 3 expansion mod-
ules on an IP phone totalling 252 softkeys. Valid for 6865i, 6867i, and 6869i phones..
Notes:
• Hard keys parameters are also available in this section but are only applicable to the 6867i and 6869i IP phones.
• 9 keypad keys are available to be configured as press-and-hold speeddials on all IP phone models.
IP Phone
Model
Softkeys Expansion Module Keys Programmable Keys Lines Available
Handset Keys
Available
6863i - Not Applicable 3 2 -
6865i - 16 to 48*
(Model M680i)
84 to 252**
(Model (M685i)
89-
6867i 10 Top and Bottom
Softkeys
16 to 48*
(Model M680i)
84 to 252**
(Model (M685i)
-9-
6869i 17 Top and Bottom
Softkeys
16 to 48*
(Model M680i)
84 to 252**
(Model (M685i)
-9-
Note:
When entering definitions for softkeys, the “#” sign must be enclosed in quotes.