Installation guide

Administrator Level Options
3-10 41-001561-00 REV00 – 10.2014
Set Phone to Factory Defaults/Erase Local Configuration
You can set phones to their factory default setting or remove a local phone’s configuration using the IP Phone UI or the
Mitel Web UI.
Setting Factory Defaults on the Phone
Factory default settings are the settings that reside on the phone after it has left the factory. The factory default settings
on the phone sets the factory defaults for all of the settings in the aastra.cfg, <model>.cfg, <mac>.cfg, and local configu-
ration. Performing this action results in losing all user-modified settings. You can reset a phone to factory defaults using
the IP Phone UI or the Mitel Web UI.
Setting Factory Defaults Using the IP Phone UI
Settings Factory Defaults Using the Mitel Web UI
IP Phone UI
For the 6863i/6865i:
1.
Press on the phone to enter the Options List.
2. Select Administrator Menu and enter your Administrator Password (default is 22222).
3. Select Factory Default.
4. The “Restore Defaults?” prompt displays.
Press # to confirm.
For the 6867i/6869i:
1.
Press on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password and press Enter. Default is “22222”.
4.
Navigate to the Reset option and press the button or Select softkey.
5.
Select Factory Default using the button or press the Select softkey.
The phone immediately resets to factory defaults and the phone reboots.
Mitel Web UI
1. Click on Operation->Reset->Current Settings.
2. In the "Restore to Factory Defaults" field, click Restore.
This restores all factory defaults, and removes any saved configuration and directory list files.