Installation guide

Operational, Basic, and Advanced Parameters
41-001561-00 REV00 – 10.2014 A-151
Language Settings
Parameter –
language
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The language you want to display for the IP Phone UI.
Valid values for all phones are:
0 (English) default
1-4
The values 1-4 are dependent on the “Language N” parameter. For example, if “lan-
guage 1: lang_fr.txt”, then “language: 1” would set the IP phone UI language to French.
Note:
All languages may not be available for selection. The available languages are dependant
on the language packs currently loaded to the IP phone. For more information about
loading language packs, see “Loading Language Packs” on page5-37.
Format Integer
Default Value 0
Range 0 to 4 (all phones)
Example language: 1
Parameter –
web language
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The language you want to display for the IP Phone UI and the Mitel Web UI.
Valid values for all phones are:
0 (English) default
1-4
The values 1-4 are dependent on the “Language N” parameter. For example, if “lan-
guage 1: lang_fr.txt”, then “language: 1” would set the webpage language to French.
Notes:
• All languages may not be available for selection. The available languages are depend-
ant on the language packs currently loaded to the IP phone. For more information
about loading language packs, see “Loading Language Packs” on page5-37.
Format Integer
Default Value 0
Range 0 to 4
Example language: 1