Installation guide

Operational, Basic, and Advanced Parameters
41-001561-00 REV00 – 10.2014 A-149
SIP Diversion Display
Global Setting
Parameter–
bellcore cadence dr4
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the cadence for Bellcore-dr4.
Note:
You can define up to 8 cadence rings. The value of -1 indicates “do not repeat”.
Format Integer
Default Value 300,200,1000,200,300,4000
Range Not Applicable
Example bellcore cadence dr4: 300,200,1000,200,300,300,200,4000
Parameter–
bellcore cadence dr5
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the cadence for Bellcore-dr5.
Note:
You can define up to 8 cadence rings. The value of -1 indicates “do not repeat”.
Format Integer
Default Value 500,-1
Range Not Applicable
Example bellcore cadence dr5: 500,-1
Parameter –
sip diversion display
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description If enabled, when an outgoing call is being diverted to another destination the phone displays
the Caller ID of the new destination and the reason for the call diversion. Similarly, for incom-
ing diverted calls, the Caller ID of the original call destination displays.
If disabled, the reason for the call diversion on outgoing diverted calls, and the Caller ID of the
original call destination on incoming diverted calls is not displayed.
Note:
• This is a global parameter.
• You must restart the phone after setting a value for this parameter.
Format Boolean
Default Value 1
Range 0 (disabled)
1 (enabled)
Example sip diversion display: 0