Installation guide

Operational, Basic, and Advanced Parameters
A-140 41-001561-00 REV00 – 10.2014
Parameter –
call hold reminder timer
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the time delay, in seconds, that a ring splash is heard on an active call when
another call was placed on hold. For example, if a call comes into Line 1, and then a call
comes into Line 2 and you answer Line 2, Line 1 is automatically placed on hold. While on
the active Line 2, after 7 seconds, a ring splash audio sounds on the line reminding you
that the call on Line 1 is still on hold. This timer begins to increment after Line 2 is
answered.
Notes:
• This parameter is used with the “call hold reminder frequency” parameter.
• You must enable this “call hold reminder timer” parameter for it to work.
• A value of “0” disables the call hold reminder feature.
Format Integer
Default Value 7
Range 0-4294967295 seconds
Example call hold reminder timer: 10
Parameter –
call hold reminder frequency
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the time interval, in seconds, between each ring splash sound on the active line. For
example, if a call comes into Line 1, and then a call comes into Line 2 and you answer Line 2,
Line 1 is automatically placed on hold. While on the active Line 2, after 7 seconds, a ring
splash audio sounds on the line reminding you that the call on Line 1 is still on hold (deter-
mined by the “call hold reminder timer” parameter), and then the ring splash is heard again
after 60 seconds (determined by this parameter).
Notes:
• You must enable the “call hold reminder” and/or “call hold reminder during active calls”
parameter(s), and the “call hold reminder timer” parameter, for this parameter to work.
• A value of “0” prevents additional rings.
Format Integer
Default Value 60
Range 0-4294967295
Example call hold reminder frequency: 50