Installation guide

Operational, Basic, and Advanced Parameters
A-114 41-001561-00 REV00 – 10.2014
Parameter –
ldap resync time
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the time of day in a 24-hour period for the IP phone to update the LDAP
directory.
This parameter works with TFTP, FTP, HTTP and HTTPS servers.
Notes:
• The resync time is based on the local time of the IP phone.
• The value of 00:00 is 12:00 A.M.
• When entering a value for this parameter using the configuration files, the value can
be entered using minute values from 00 to 59 (for example, the auto resync time can
be entered as 02:56).
• Resync adds up to 15 minutes random time to the configured time. For example, if
the resync time parameter is set to 02:00, the event takes place any time between
02:00 and 02:15.
• When the language on the phone is set to French or Spanish, you must enter the
time in the format "00h00" (configuration files only).
Format hh:mm
00h00 (for French and Spanish configuration files)
Default Value 02:00
Range hh = 00 to 23
mm = 00 to 59
Example ldap resync time: 03:24
Parameter –
ldap resync days
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the amount of days that the phone waits between LDAP directory resync
operations.
Note:
A value of 0 causes the phone to checksync every time the clock reads the proper
time. A value of 1 forces the phone to wait 24 hours prior to doing the first checksync.
Format Integer
Default Value 0
Range 0-364
Example ldap resync days: 1
Parameter –
ldap resync max delay
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the maximum time, in minutes, the phone waits past the scheduled time
before starting an LDAP directory checksync.
Format Integer
Default Value 30
Range 0-1439
Example ldap resync max delay: 20