Installation guide

Operational, Basic, and Advanced Parameters
41-001561-00 REV00 – 10.2014 A-111
Default Value Personal Contacts
Range N/A
Example xsi personal contacts name: XSI Personal
Parameter –
xsi enterprise directory name
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the folder name of the BroadSoft XSI Enterprise Directory when enabled.
Format Alphanumeric characters
Default Value Enterprise Directory
Range N/A
Example xsi enterprise directory name: XSI Enterprise
Parameter –
xsi resync time
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the time of day in a 24-hour period for the IP phone to update the BroadSoft XSI
directories.
This parameter works with TFTP, FTP, HTTP and HTTPS servers.
Notes:
• The resync time is based on the local time of the IP phone.
• The value of 00:00 is 12:00 A.M.
• When entering a value for this parameter using the configuration files, the value can
be entered using minute values from 00 to 59 (for example, the auto resync time can
be entered as 02:56).
• Resync adds up to 15 minutes random time to the configured time. For example, if
the resync time parameter is set to 02:00, the event takes place any time between
02:00 and 02:15.
• When the language on the phone is set to French or Spanish, you must enter the time
in the format "00h00" (configuration files only).
Format hh:mm
00h00 (for French and Spanish configuration files)
Default Value 02:30
Range hh = 00 to 23
mm = 00 to 59
Example xsi resync time: 03:24
Parameter –
xsi resync days
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the amount of days that the phone waits between BroadSoft XSI directory
resync operations.
Note:
A value of 0 causes the phone to checksync every time the clock reads the proper time.
A value of 1 forces the phone to wait 24 hours prior to doing the first checksync.
Format Integer
Default Value 0
Range 0-364
Example xsi resync days: 1