Installation guide

Operational, Basic, and Advanced Parameters
A-108 41-001561-00 REV00 – 10.2014
Parameter –
exchange contacts enabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies whether or not the Microsoft Exchange directory should be enabled to be
accessed on the phone.
Format Boolean
Default Value 0
Range 0 (Disabled)
1 (Enabled)
Example exchange contacts enabled: 1
Parameter –
exchange contacts name
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the folder name of the Microsoft Exchange directory when enabled.
Format Alphanumeric characters
Default Value Exchange Contacts
Range N/A
Example exchange contacts name: MS Exchange
Parameter –
exchange contacts resync time
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the time of day in a 24-hour period for the IP phone to update the Microsoft
Exchange directory.
This parameter works with TFTP, FTP, HTTP and HTTPS servers.
Notes:
• The resync time is based on the local time of the IP phone.
• The value of 00:00 is 12:00 A.M.
• When entering a value for this parameter using the configuration files, the value can
be entered using minute values from 00 to 59 (for example, the auto resync time can
be entered as 02:56).
• Resync adds up to 15 minutes random time to the configured time. For example, if
the resync time parameter is set to 02:00, the event takes place any time between
02:00 and 02:15.
• When the language on the phone is set to French or Spanish, you must enter the time
in the format "00h00" (configuration files only).
Format hh:mm
00h00 (for French and Spanish configuration files)
Default Value 02:00
Range hh = 00 to 23
mm = 00 to 59
Example exchange contacts resync time: 03:24