Installation guide

Administrator Level Options
41-001561-00 REV00 – 10.2014 3-3
References
For information about all other user options in the “Options Menu”, see your <Model-Specific> IP Phone User Guide.
For procedures on configuring Administrator Options on the IP phone via the IP phone UI, see:
• Chapter 4, “Configuring Network and Session Initiation Protocol (SIP) Features”
• Chapter 5, “Configuring Operational Features”
• Chapter 6, “Configuring Advanced Operational Features”
Simplified IP Phone UI Options Menu
An Administrator can replace the existing options menu on the Phone UI with a more simplified options menu. In the con-
figuration files, the “options simple menu” parameter allows you to display either the full menu (if set to 0), or the simpli-
fied menu (if set to 1). The following table illustrates the differences between the full menu and the simplified menu.
6863i and 6865i
6867i and 6869i
Note:
When setting the “options simple menu” parameter, the menu changes in the Phone UI only. The Mitel Web UI is not
affected.
Full Options Menu Simplified Options Menu
Call Forward Call Forward
Preferences Preferences
Phone Status Phone Status
Password Removed
Administrator Menu Removed
Restart Phone Accessible through Phone Status
Phone Lock Phone Lock
Full Options Menu Simplified Options Menu
Language Removed
Time and Date Removed
Directory Removed
Credentials Removed
Call Forward Call Forward
Lock Lock (Password Sub-Option Removed)
Status Status
Audio Audio
Display Display
Dialing Removed
Restart Restart
Warning!
When using the simplified menu, you cannot change the Network settings from the IP Phone UI. If the network settings
become misconfigured, you must “factory default” the phone and use the full menu to recover the network settings
from the Phone UI OR use the Mitel Web UI to configure the network settings.